2017-Fiesta-Owners Manual

Keys and Remote Controls

Note: Your vehicle’s back-up keys came with a security tag that provides important vehicle key cut information. Keep the tag in a safe place for future reference. Programming a New Integrated Keyhead Transmitter 1. Turn the ignition key fromposition 0 to position II 8 times within 10 seconds. 2. Turn the ignition key to position 0 . A tone sounds to indicate that it is now possible to program a remote control. 3. Press any button on a new remote control within 10 seconds. A tone sounds as confirmation. 4. Repeat step 3 within 10 seconds for each new remote control. Do not remove the key from the ignition when pressing the button on the remote control. 5. Turn the ignition key to position II , or wait for 10 seconds without programming another remote control to end the key programming. Only the remote controls that you have just programmed are now able to lock and unlock your vehicle. Reprogramming the Unlocking Function Note: When you press the unlock button either all the doors are unlocked or only the driver’s door and the liftgate are unlocked. Pressing the unlock button again unlocks all the doors. You can reprogram the unlocking function using the remote control so that only the driver's door is unlocked. This will enable two-stage unlocking. Press and hold the unlock and lock buttons on the remote control simultaneously for at least four seconds with the ignition off. The direction indicators will flash twice to confirm the change.

E162601 Note: Your vehicle’s keys came with a security label that provides important vehicle key cut information. Keep the label in a safe place for future reference. Intelligent Access Transmitter (If Equipped) Your intelligent access keys operate the power locks. The key must be in your vehicle to activate the push button start system. The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door.

2

1

1

E87964

47

Fiesta(CCT)Canada/UnitedStatesofAmerica,HE8J 19A321AAenUSA,Editiondate:201607,FirstPrinting