2018-Continental-Owners-Manual

Lighting

Switch the lighting control to the autolamps position. See Autolamps (page 94). Overriding the System When you switch on the high beams, pushing or pulling the stalk provides a temporary override to low beam. Automatic High Beam Indicator (IfEquipped)

A. Without adaptive headlamps. B. With adaptive headlamps.

The system only works with the lighting control in the autolamp position. You can switch this feature on or off in the information display. The system has a power-upmovement check feature. When you start your vehicle, the lamps track left to right, then back to center to alert the driver that the system is working properly.

A

The indicator lamp illuminates to confirm when the system is ready to assist.

DIRECTION INDICATORS

ADAPTIVE HEADLAMPS (If Equipped) Note: There is a delay of two to five seconds before the system operates when you drive your vehicle. Note: The system is only active at speeds above 3 mph (5 km/h). The headlamp beams move in the same direction as the steering wheel. This provides more visibility when driving around curves.

B

E222351

E161714

97

Continental (CPL) Canada/United States of America, enUSA, Edition date: 201706, First Printing