2018-Continental-Owners-Manual

Maintenance

CHANGING A BULB

WARNINGS Bulbs can become hot. Let the bulb cool down before removing it. Failure to do so could result in personal injury. Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury. Use the correct specification bulb. See Bulb Specification Chart (page 330). Install in the reverse order unless otherwise stated. High-Intensity Discharge Headlamps These lamps operate at a high voltage. See an authorized dealer if they fail.

E167359

E142465 4. There is a distinct cut-off (change from light to dark) in the left portion of the beam pattern. Position the top edge of this cut-off 2 inches (5 centimeters) below the horizontal reference line.

5. Locate the vertical adjuster on each headlamp. Use a Phillips #2 screwdriver to turn the adjuster either clockwise or counterclockwise to adjust the vertical aim of the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line. 6. Repeat Steps 3 through 7 to adjust the other headlamp. 7. Close the hood and turn off the lamps. Horizontal Aim Adjustment Horizontal aim is not required for this vehicle and is not adjustable.

329

Continental (CPL) Canada/United States of America, enUSA, Edition date: 201706, First Printing