2018 Edge Owner Manual

Maintenance

Note: Make sure you install the oil filler cap correctly. Note: Soak up any spillage with an absorbent cloth immediately. OIL CHANGE INDICATOR RESET Use the information display controls on the steering wheel to reset the oil change indicator. From themainmenu scroll to: Action and description Message

Message

Action and description

If the instrument cluster displays one of the following messages, repeat the process. Not Reset Reset Cancelled

ENGINE COOLANT CHECK WARNINGS Never remove the coolant reservoir cap when the engine is running or hot. Do not put coolant in the windshield washer reservoir. If sprayed on the windshield, coolant could make it difficult to see through the windshield. To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure. Steam and hot liquid can come out forcefully when you loosen the cap slightly. Do not add coolant further than the MAX mark. When the engine is cold, check the concentration and level of the coolant at the intervals listed in the scheduled maintenance information. See Scheduled Maintenance (page 485). Note: Make sure that the coolant level is between the MIN and MAX marks on the coolant reservoir. Note: Coolant expands when it is hot. The level may extend beyond the MAX mark.

Settings

Press the right arrowbutton, then from this menu scroll to the following message. Press the right arrowbutton, then from this menu scroll to the following message. Press the right arrowbutton, then from this menu scroll to the following message. Press and hold the OK button until the instrument Reset Successful When the oil change indic- ator resets the instrument cluster displays 100%. Remaining Life {00}% cluster displays the following message.

Vehicle

Oil Life

Hold OK to Reset

272

Edge(CDQ)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting