2018 Edge Owner Manual

Doors and Locks

The lamps do not turn off if: • You turn them on with the lamp control. • Any door is open. Illuminated Exit The interior lamps and some exterior lamps illuminatewhen all doors are closed, you switch the ignition off and you remove the key from the ignition. The lamps turn off if all the doors remain closed and: • 25 seconds have elapsed. • You press the START/STOP button. Battery Saver If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver shuts themoff 10minutes after you switch the ignition off. Accessory Mode Battery Saver for Intelligent Access Keys If you leave the ignition switched on, it shuts off once it detects a certain amount of battery drain, or after 45 minutes. KEYLESS ENTRY (If Equipped) SECURICODE™KEYLESS ENTRY KEYPAD The keypad is near the driver window. It illuminates when touched. Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Enter your entry code again more slowly.

E138637 You can use the keypad to do the following: • Lock or unlock the doors. • Recall memory seat and mirror positions. • Program and erase user codes. • Arm and disarm the anti-theft alarm. You can operate the keypad with the factory-set five-digit entry code. The code is on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also program up to five of your own five-digit personal entry codes. Programming a Personal Entry Code 1. Enter the factory-set five-digit code. 2. Press 1·2 on the keypad within five seconds. 3. Enter your personal five-digit code. You must do this within five seconds of completing step 2. 4. Press 1·2 on the keypad to save personal code 1. The doors lock then unlock to confirm that programming was successful.

67

Edge(CDQ)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting