2018 Escape Owner's Manual

Maintenance

Replacing Turn Signal Bulbs

4. Gently pull the lamp assembly away from the vehicle. 5. Disconnect the electrical connector. 6. Remove the turn signal bulb by turning the lower bulb socket counterclockwise. Gently pull the bulb straight out of the socket. Install the new bulb in reverse order. ReplacingReverseLampAssembly For bulb replacement, see your authorized dealer. ReplacingLicensePlateLampBulb

E255368

A B

Turn lamp Side marker

2

2

1

3

E72789 1. Carefully release the spring clip. 2. Remove the lamp. 3. Remove the bulb. Reverse steps to reinstall bulb. ReplacingHigh-MountBrakeLamp Bulb Your vehicle is equipped with an LED center high-mount stop lamp located in the spoiler. It is designed to last the life of the vehicle. If replacement is required, see your authorized dealer.

3

E142473 1. Make sure the headlamp control is in the off position and open the liftgate. 2. Remove the two bolt covers using a standard flat tip screwdriver. 3. Remove the two bolts from the lamp assembly.

260

Escape(TM2)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting