2018 Escape Owner's Manual

Keys and Remote Controls

The remote control uses one coin-type three-volt lithium battery CR2032 or equivalent. Integrated Keyhead Transmitter

E142432 2. Twist a thin coin under the tab hidden behind the backup key head to remove the battery cover. Do not use the backup key to remove the cover or you could damage the intelligent access key.

E138619 1. Twist a thin coin in the slot of the transmitter near the key ring to remove the battery cover. 2. Remove the old battery.

E138622 3. Remove the old battery.

E138620 3. Insert the new battery. Refer to the instructions inside the transmitter for the correct orientation of the battery. Press the battery down to make sure it is fully in the housing. 4. Snap the battery cover back onto the transmitter. Intelligent Access Key 1. Remove the backup key from the transmitter.

4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 5. Snap the battery cover back onto the transmitter and install the backup key.

49

Escape(TM2)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting