2018-F150-Owner's Manual

Towing

Points to Remember Note: Do not attempt removal of the trailer brake controller without consulting the Workshop Manual. Damage to the unit may result. • Adjust gain setting before using the trailer brake controller for the first time. • Adjust gain setting, using the procedure above, whenever road, weather and trailer or vehicle loading conditions change fromwhen the gainwas initially set. • Only use the manual control lever for proper adjustment of the gain during trailer setup. Misuse, such as application during trailer sway, could cause instability of trailer or tow vehicle. • Avoid towing in adverse weather conditions. The trailer brake controller does not provide anti-lock control of the trailer wheels. Trailer wheels can lock up on slippery surfaces, resulting in reduced stability of trailer and tow vehicle. • The trailer brake controller is equipped with a feature that reduces output at vehicle speeds below 11mph (18 km/h) so trailer and vehicle braking is not jerky or harsh. This feature is only available when applying the brakes using your vehicle's brake pedal, not the controller. • The controller interacts with the brake control system and powertrain control system of your vehicle to provide the best performance on different road conditions. • Your vehicle's brake system and the trailer brake system work independently of each other. Changing the gain setting on the controller does not affect the operation of your vehicle's brakes whether you attach a trailer or not.

• When you switch the engine off, the controller output is disabled and the display and module shut down. The controller module and display turn on when you switch the ignition on. • The trailer brake controller is only a factory-installed or dealer-installed item. Ford is not responsible for warranty or performance of the controller due to misuse or customer installation. Trailer Lamps WARNING Never connect any trailer lampwiring to the vehicle's tail lamp wiring; this may damage the electrical system resulting in fire. Contact your authorized dealer as soon as possible for assistance in proper trailer tow wiring installation. Additional electrical equipment may be required. Trailer lamps are required on most towed vehicles. Make sure all running lights, brake lights, turn signals and hazard lights are working. Using a Step Bumper (If Equipped) The rear bumper is equipped with an integral hitch and only requires a ball with a one-inch (25.4 millimeter) shank diameter. The bumper has a 5000-pound (2268 kilogram) trailer weight and a 500-pound (227 kilogram) tongue weight capacity. If it is necessary to relocate the hitch ball position, youmust install a frame-mounted trailer hitch.

308

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting