2018-F150-Owner's Manual

Wheels and Tires

the best of your ability, to the point where the ratchet or slip occurs, if possible. The spare tire carrier will not allow you to overtighten. If the spare tire carrier ratchets or slips with little effort, contact your authorized dealer. 4. Check that the tire lies flat against the frame and is properly tightened. Try to push or pull, then turn the tire to be sure it will not move. Loosen and retighten, if necessary. Failure to properly stow the spare tire may result in failure of the winch cable and loss of the tire. 5. Repeat this tightness check procedure when servicing the spare tire pressure (every six months, as per your scheduled maintenance information), or at any time that the spare tire is disturbed through service of other components. 6. If removed, install the spare tire lock into the bumper drive tube with the spare tire lock key and jack handle. Stowing the Vehicle Jack and Tool Bag

E233626 2. Place the tools inside of the tool bag.

E233625 3. Install the tool bag to the top of the vehicle jack.

E184021 1. Adjust the jack up or down by rotating the lead screw located on the end of the jack. The stowagemarkings should line up with the bottom channel.

E233624 4. Install the D-ring straps that secure the tool bag to the vehicle jack.

409

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting