2018-F150-Owner's Manual

Capacities and Specifications

Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalentmeetingWSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. Note: Automatic transmissions that require MERCON® ULV transmission fluid should only useMERCON®ULV transmission fluid. The use of any other fluid may cause transmission damage.

1. For severe duty service, use SAE 5W-40 API CK-4. 2. For bio-diesel fuel blends (B20 max), use SAE 5W-40 API CK-4. Do not use supplemental engine oil additives because they are unnecessary andcould lead toenginedamage thatmay not be covered by your vehicle warranty.

CAPACITIES AND SPECIFICATIONS - 3.3L DURATEC - V6 Capacities WARNING The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.

Item

Capacity

Engine oil (with oil filter)

6.0 qt (5.7 L)

Engine coolant

13.6 qt (12.86 L)

Brake fluid

Between MIN/MAX on brake fluid reservoir

Front axle fluid (Four-wheel drive)

3.5 pt (1.7 L) 5.5 pt (2.6 L) 13.1 qt (12.4 L) *

Rear axle fluid

Automatic transmission fluid

Transfer case fluid Four-wheel drive (Electronic Shift-on-the- Fly) Transfer case fluid Automatic four-wheel drive (Torque on demand)

1.5 qt (1.4 L)

1.5 qt (1.4 L)

430

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting