2018-F150-Owner's Manual

MyKey™ (If Equipped)

• Various vehicle speed reminders so you know when your vehicle approaches the limits. Warnings appear in the information display and an audible warning sounds when you exceed the limit. • Audio systemmaximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. • Always on setting. When this is selected, you will not be able to turn off Advance Trac or traction control, 911 Assist or Emergency Assistance, or Do Not Disturb (if your vehicle is equipped with these features). CREATING AMYKEY Use the information display to create a MyKey. To create a MyKey: 1. Place your key into the ignition or, if your vehicle is equipped with keyless start, place your transmitter into the backupposition. Details on the backup position's location are in another chapter. See Passive Anti-Theft System (page 77). 2. Switch the ignition on. 3. Access the main menu using your left-hand-side steeringwheel controls. 4. Depending on your display options, select either Settings or Advanced Settings , then MyKey and finally CreateMyKey . 5. When the menu reads Hold OK to CreateMyKey , press and hold the OK button to program a MyKey. 6. The display then prompts you to program the Configurable settings.

You can programthe configurable features now or at any time. You can advance through the settingswithout programming them by pressing the OK button. MyKey then keeps all of the default settings. When you finish programming your MyKey, the Type 3 information display adds a confirmation screen, NewMyKey Has Been Created . The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter. Programming/Changing Configurable Settings Use the information display to program or change your configurable MyKey settings. 1. Place your admin key into the ignition or, if your vehicle is equipped with keyless start, place your admin transmitter into the backup position. Details on the backup position's location are in another chapter. See Passive Anti-Theft System (page 77). 2. Depending on your display options, select either Settings or Advanced Settings , then MyKey and finally to various configurable features. 3. Scroll down through the choices, and then highlight the feature you want to configure. Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.

63

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting