2018-Flex-Owner's-Manual

Information Displays

Keys and Intelligent Access

Message

Action

To START Press Brake

A reminder to press the brake while starting your vehicle. The key is not detected by the system. See KeylessStarting (page 146). The Start Stop button is pressed to shut off the engine and an Intelligent Access key is not detected inside your vehicle. There is a problem with your vehicle’s starting system. See an authorized dealer for service. During spare key programming, an intelligent access key is programmed to the system. During spare key programming, themaximumnumber of keys have been programmed. Your vehicle is in the accessory ignition state. Stop your vehicle as soon as safely possible, turn off the engine. Check the oil level. If thewarning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible. The engine oil life remaining is 10% or less. See Engine Oil Check (page 247). The oil life left reaches 0%. See EngineOilCheck (page 247). The engine coolant temperature is excessively high. Indicates that your vehicle is still in Transport mode. This may not allow some features to operate properly. Contact an authorized dealer. Indicates that your vehicle is still in Factory mode. This may not allow some features to operate properly. Contact an authorized dealer. The washer fluid is low and needs to be refilled. Action

No Key Detected

Restart Now or Key is Needed Accessory Power is Active Starting System Fault Key Programmed x Keys Total Max Number of Keys Learned

Maintenance

Message

Low Engine Oil Pressure

Change Engine Oil Soon

Oil Change Required Engine Coolant Over Temperature Washer Fluid Level Low TransportModeContact Dealer

Factory Mode Contact Dealer

110

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting