2018-Flex-Owner's-Manual

Maintenance

Front Fog Lamp (If Equipped)

3

E220460 1. Switch all of the lamps and the ignition off. 2. Disconnect the electrical connector. 3. Turn the bulb holder counterclockwise and remove it. Note: You cannot separate the bulb from the bulb holder. Note: Do not touch the bulb glass.

E220461 1. Switch all of the lamps and the ignition off. 2. Use suitable tools, for example a screwdriver and a socket wrench, to remove the wheel arch liner fixings. Carefully reposition thewheel arch liner to access to the front fog lamp bulb and electrical connector. Note: To remove the lower push pin, use a flat-bladed screwdriver to pull up the center release pin. 3. Disconnect the electrical connector.

261

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting