2018-Flex-Owner's-Manual

Capacities and Specifications

Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalentmeetingWSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. Note: Automatic transmissions that require MERCON® LV transmission fluid should only use MERCON® LV transmission fluid. The use of any other fluid may cause transmission damage.

E142732 An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC. Do not use supplemental engine oil additives because they are unnecessary andcould lead toenginedamage thatmay not be covered by your vehicle warranty.

Alternative Engine Oil for Extremely Cold Climates

To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.

Materials

Name

Specification

Motorcraft® SAE 0W-20 Premium Synthetic Blend Motor Oil: Engine Oil - SAE 0W-20 XO-0W20-QSP

WSS-M2C947-A

308

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting