2018-Flex-Owner's-Manual

Seatbelts

In addition, the retractor is designed to lock if you pull the webbing out too quickly. If the seatbelt retractor locks, slowly lower the height adjuster to allow the seatbelt to retract. If the retractor does not unlock, pull the seatbelt out slowly then feed a small length of webbing back toward the stowed position. For rear seatbelts, recline the rear seat backrest or push the seat backrest cushion away from the seatbelt. Feed a small length of webbing back automatically pre-locks. The belt still retracts to remove any slack in the shoulder belt. The automatic lockingmode is not available on the driver seatbelt. When to Use the Automatic Locking Mode Use thismode any time a child safety seat, except a booster, is installed in passenger front or rear seating positions. Properly restrain children 12 years old and under in a rear seating position whenever possible. See Child Safety (page 18). How to Use the Automatic Locking Mode Non-inflatable seatbelts toward the stowed position. Automatic LockingMode In this mode, the shoulder belt

Pregnant women should alwayswear their seatbelt. Position the lap belt portion of a combination lap and shoulder belt low across the hips below the belly and worn as tight as comfort allows. Position the shoulder belt to cross the middle of the shoulder and the center of the chest. Seatbelt LockingModes WARNINGS After a crash, have a qualified technician check all the seatbelts to make sure the seatbelts including the automatic locking retractor feature for child restraints operate properly. We recommend replacing any systemthat has damage or does not operate properly. Failure to do so can result in personal injury or death in the event of a sudden stop or another crash. You must replace the seatbelt if the automatic locking retractor or any other seatbelt function is not operating correctly. Failure to replace the seatbelt and retractor assembly could increase the risk of injury in a crash. All safety restraints in the vehicle are combination lap and shoulder belts. The driver seatbelt has the vehicle sensitive locking mode. The front outboard passenger and rear seat belts have both the vehicle sensitive lockingmode and the automatic locking mode. Vehicle SensitiveMode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of about 5 mph (8 km/h) or more, the combination seatbelts lock to help reduce forward movement of the driver and passengers.

E142591

36

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting