2018-Flex-Owner's-Manual

Keys and Remote Controls

2. Press the remote start button twice. The exterior lamps flash twice. The horn sounds if the systemfails to start, unless quiet start is on. Quiet start runs the blower fan at a slower speed to reduce noise. You can switch this feature on or off in the information display. See General Information (page 97). Note: If you remote start your vehicle with an integrated keyhead transmitter, youmust switch the ignition on before driving your vehicle. If you remote start your vehicle with an intelligent access transmitter, you must press the push button ignition switch on the instrument panel once while applying the brake pedal before driving your vehicle. The power windows do not work during remote start and the radio does not turn on automatically. The parking lamps remain on and the vehicle runs for 5, 10 or 15 minutes, depending on the setting. Extending the Engine Running Time To extend the engine running time duration of your vehicle during remote start, repeat steps 1 and 2 while the engine is running. If the duration is set to 10 minutes, the duration extends by another 10 minutes. For example, if your vehicle had been running from the first remote start for 5 minutes, your vehicle continues to run now for a total of 20 minutes. You can extend the remote start up to a maximum of 35 minutes. Wait at least five seconds before remote starting after the engine stops running. Turning Your Vehicle Off After Remote Starting

You may have to be closer to your vehicle to remotely switch off your vehicle after remote starting. This is due to the added noise of your running vehicle. You can switch this feature on or off in the information display. See General Information (page 97). Memory Feature (If Equipped) You can use the remote control to recall memory settings for the driver seat, power mirrors, power steering column and power adjustable foot pedals. Press the unlock button on the remote control or unlock your vehicle with the intelligent access key to recall the memory positions. You can program the remote control or intelligent access key to recall memory positions. See Memory Function (page 128). REPLACING A LOST KEYOR REMOTE CONTROL Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 73).

Press the button once. The parking lamps turn off.

E138625

56

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting