2018-Flex-Owner's-Manual

Doors and Locks

5. Switch the ignition on. The horn sounds indicating your vehicle is in programming mode. 6. Press the power door unlock control and within five seconds, press the power door lock control. The horn sounds once if disabled or twice if enabled. 7. Switch the ignition off. The horn sounds indicating programming is complete. Toenableordisableautounlock,dothe following: 1. Switch the ignition on. 2. Press the power door unlock control three times. 3. Switch the ignition off. 4. Press the power door unlock control three times. 5. Switch the ignition on. The horn sounds indicating your vehicle is in programming mode. 6. Press the power door lock control and within five seconds, press the power door unlock control. The horn sounds once if disabled or twice if enabled. 7. Switch the ignition off. The horn sounds indicating programming is complete. Illuminated Entry The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control. The lamps turn off if: • The ignition is on. • You press the remote control lock button. • 25 seconds have elapsed.

The lamps do not turn off if: • You switch them on with the lighting control. • Any door is open. Illuminated Exit The interior lamps and some exterior lamps illuminatewhen all doors are closed and you switch the ignition off. The lamps turn off if all the doors remain closed and: • 25 seconds have elapsed. • You lock your vehicle from the outside. Battery Saver If you leave the courtesy lamps, interior lamps or headlamps on, the battery saver shuts themoff 10minutes after you switch the ignition off. Battery Saver for Intelligent Access Keys (If Equipped) If you leave the ignition switched on and the engine is not running, the battery saver will turn the ignition off when it detects a certain amount of battery drain, or after 45 minutes have elapsed. KEYLESS ENTRY SECURICODE™Keyless Entry Keypad The keypad is near the driver window. It illuminates when touched. Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Enter your entry code again more slowly.

66

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting