2018-Flex-Owner's-Manual

Liftgate

Closing the Liftgate

From the Instrument Panel

With the transmission in park (P), press the button on the instrument panel.

WARNING Keep clear of the liftgate when using the rear switch.

E138633

Remote Control

Press the button twice within three seconds.

E138630

Outside Control Button Opening the Liftgate

1. Unlock the liftgate with the remote control or power door unlock control. If an intelligent access key is within 3 ft (1m) of the liftgate, the liftgate unlocks when you press the liftgate release button.

E244708 Press and release the liftgate control button in the rear cargo area. Stopping the LiftgateMovement Note: Do not apply sudden excessive force to the liftgate while it is in motion. This could damage the power liftgate and its components. You can stop the liftgate movement by doing any of the following: • Pressing the liftgate control button. • Pressing the liftgate button on the remote control twice. • Pressing the liftgate button on the instrument panel. • Moving your foot under and away from the center rear bumper in a single-kick motion. * * This method only works for vehicles with the hands-free liftgate feature. Obstacle Detection When Closing The system stops when it detects an obstacle. A tone sounds and the system reverses to open. Once you remove the obstacle, you can power close the liftgate.

E138632 2. Press the button located in the top of the liftgate pull-cup handle. Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system’s obstacle detection feature and stop the power operation or reverse its direction, replicate a strut failure, or damage mechanical components.

71

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting