2018-Ford-Expedition-Owners-Manual

Stability Control

Stability Control and Traction Control with RSC Features

Button pressed and held for more than 5 seconds at vehicle speed under 35 mph (56 km/h) Vehicle speed exceeds 35mph (56 km/h) after button is pressed and held for more than 5 seconds

Flashes then illuminated solid 2

Disabled

Disabled

Disabled 4

Illuminated

Enabled

Enabled 1

Disabled 1

Not illuminated Button pressed again after deactivation

Enabled

Enabled

Enabled

Button not pressed and the transfer case is switched to4X4 Low 3

Illuminated

Disabled

Disabled

Disabled 4

1 The traction control systemmay still be enabled but with higher entry thresholds compared to the full system. The electronic stability control entry thresholds are higher compared to the full system. 2 When you press and hold the button for more than 5 seconds the indicator lamp blinks for three seconds. 3 Your vehicle may or may not have this feature available. When you select 4X4 Low the stability control light illuminates and all stability control with RSC features are disabled. 4 Engine traction control and two-wheel spin brake traction control functions are disabled. Single wheel spin traction control is always enabled.

210

Expedition(TB8)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting