2018-Ford-Expedition-Owners-Manual

Towing

• You can change your sticker location by going into the Towing menu, selecting trailer options, selecting change trailer settings and then selecting the change sticker option. The previous sticker must be removed. ONLYONE STICKER SHOULD BE PLACEDON THE TRAILER FOR CORRECT SYSTEMFUNCTION. • The camera system uses the entered measurements to help locate the sticker. Inaccurate measurements reduce the system’s ability to locate the sticker. Check the measurements entered into the system are correct. Refer to the step 4 of Pro trailer backup Assist setup for instructions on measurements. • You can change your measurement by going into the Towing menu, selecting trailer options, selecting change trailer setting and then selecting the change sticker option. Disregard the prompt to remove this sticker and continue to the next step if you only plan to update the measurements for the current sticker location.

System does not backup straight: • Factors such as the drawbar connection to the hitch receiver, road camber, road grade and compliance in the trailer suspension can influence howstraight the system is able to back your trailer when the knob is not turned. You can compensate for the trailer drifting to the right or left by slowly turning the Pro Trailer Backup Assist knob until the trailer is following your desiredpath and then holding the knob in that position. If you would like to recalibrate the system for straight backing, you can do so with the following procedure. • Go into the Towing menu, select trailer options, select change trailer setting and then select the change sticker option. Your saved measurements display. Do not change them but continue to confirmmeasurements. Once you confirm the measurements, the systemprompts you toperformthe calibration procedure. Systemconsistently shows StopNowMax trailer angle reached warning: • The system uses your measurements to determine sticker position and establish system limits. Accurate sticker placement and trailer measurements provide the best system performance. If you are consistently receiving this warning it is likely there is an issue with sticker placement or the entered measurements. Make sure that the

272

Expedition(TB8)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting