2018-Ford-Expedition-Owners-Manual

Maintenance

CHANGING A BULB WARNING

Bulbs can become hot. Let the bulb cool down before removing it. Failure to do so could result in personal injury. Install in the reverse order unless otherwise stated. Note: If the bulb is accidentally touched, clean it with rubbing alcohol before installing it. Headlamp Bulb 1. Switch all of the lamps and the ignition off.

E248807 5. Locate the vertical adjuster on each headlamp. Use a #2 Phillips screwdriver to turn the adjuster either counterclockwise or clockwise in order to adjust the vertical aim of the headlamp. 6. Repeat Steps 3 through 7 to adjust the other headlamp. 7. Close the hood and turn off the lamps. Horizontal AimAdjustment Horizontal aim is not required for this vehicle and is not adjustable. REMOVING AHEADLAMP The bumper fascia and grille must be removed in order to remove the headlamp assembly, see an authorized dealer if your headlamp assembly need replacement.

E248888 2. Carefully remove the cover.

3. Disconnect the electrical connector. 4. Turn the bulb holder counterclockwise and remove it. Note: You cannot separate the bulb from the bulb holder. Note: Do not touch the bulb glass. LED Headlamp Bulb (If Equipped) These lamps have LED bulbs. Contact an authorized dealer.

329

Expedition(TB8)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting