2018-Ford-Expedition-Owners-Manual

Wipers andWashers

In these conditions, you can do the following: • Lower the sensitivity of the autowipers to reduce the amount of smearing on the windshield. • Switch to normal or high-speed wipe.

Awipe occurs a fewseconds after washing to clear any remaining washer fluid. You can switch this feature on or off in the information display. Front CameraWasher (If Equipped) Operating the windshield washer also operates the front camera washer. REARWINDOWWIPER AND WASHERS Note: Make sure you switch the windshield wipers off before entering a car wash. Rear WindowWiper Blade

• Switch autowipers off. Autowipers Settings

Autowipers default to on and remain on until you switch themoff in the information display. When you switch off autowipers, the wipers operate in intermittent mode. WINDSHIELDWASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage thewiper blades or cause thewiper motor to burn out. Always use the windshield washers before wiping a dry windshield. Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat.

E205529 Rotate the control to switch to select: Interval Length Position Short wipe interval. 2 Long wipe interval. 1 Off. 0 Rear WindowWasher Rotate and hold the control to the top or bottom position to switch on the rear window washer. When you release the lever, wiping continues for a short period of time.

E205528 • A brief press causes a single wipe without washer fluid. • A brief press and hold causes the wipers to swipe three times with washer fluid. • A long press and hold turns on the wipers and washer fluid for up to 10 seconds.

86

Expedition(TB8)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting