2018-Ford-Explorer-Owners-Manual-

Driving Aids

Switching the SystemOn and Off Note: The systemon or off setting is stored until it ismanually changed, unless aMyKey is detected. If the system detects a MyKey it defaults to on and themode is set to Alert. Note: If a MyKey is detected, pressing the button will not affect the on or off status of the system. SystemSettings The system has optional setting menus available. The system stores the last-known selection for each of these settings. You do not need to readjust your settings each time you turn on the system. Mode: This setting allows you to select which of the system features you can enable. Press the button on the steering wheel stalk to switch the system on or off.

Aid only – Provides an assistance steering torque input toward the lane center when the system detects an unintended lane departure.

A

Alert

Aid B Alert + Aid – Provides an assistance steering torque input toward the lane center. If your vehicle continues drifting out of the lane, the system provides a steering wheel vibration. Note: The alert and aid diagrams illustrate general zone coverage. They do not provide exact zone parameters. Intensity: This setting affects the intensity of the steeringwheel vibration used for the alert and alert + aid modes. This setting does not affect the aid mode.

Alert only – Provides a steering wheel vibration when the system detects an unintended lane departure.

225

Explorer(TUB)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting