2018 Fusion Owner's Manual

Maintenance

Note: Make sure that the wiper blade locks into place. Lower the wiper arm and blade back to the windshield. The wiper arms will automatically return to their normal position when the ignition is turned on. Replace wiper blades at least once per year for optimum performance. Poor wiper quality can be improved by cleaning the wiper blades and the windshield. ADJUSTINGTHEHEADLAMPS Vertical AimAdjustment The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer. Headlamp Aiming Target

Vertical AimAdjustment Procedure 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 ft (7.6 m) away. 2. Measure the height of the headlamp bulb center from the ground and mark an8 ft (2.4m) horizontal reference line on the vertical wall or screen at this height. Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other. 3. Turn on the low beam headlamps to illuminate the wall or screen and open the hood.

E142465 4. On the wall or screen you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp will need to be adjusted.

E142592

A B C D

8 feet (2.4 meters)

Center height of lamp to ground

25 feet (7.6 meters)

Horizontal reference line

270

Fusion(CC7)Canada/UnitedStatesofAmerica,enUSA,FirstPrinting