2018 Fusion Owner's Manual

Maintenance

Headlamp

A B

E145594 5. Locate the vertical adjuster on each headlamp. Using a Phillips #2 screwdriver, turn the adjuster either clockwise or counterclockwise in order to adjust the vertical aim of the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line. 6. Close the hood and turn off the lamps. Horizontal AimAdjustment Horizontal aim is not required for this Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury. Bulbs become hot when in use. Let them cool down before you remove them. Use the correct specification bulb. See Bulb Specification Chart (page 273). Install in the reverse order unless otherwise stated. vehicle and is not adjustable. CHANGING A BULB WARNINGS

E222975

Headlamp high beam. Headlamp low beam. B Note: LED headlamps are not serviceable. Have your vehicle checked as soon as possible. Headlamp LowBeam 1. Carefully remove the cover. 2. Disconnect the electrical connector. 3. Turn the bulb holder counterclockwise and remove it. Note: Do not touch the bulb glass. Note: You cannot separate the bulb from the bulb holder. Headlamp High Beam 1. Carefully remove the cover. 2. Disconnect the electrical connector. 3. Turn the bulb holder counterclockwise and remove it. Note: Do not touch the bulb glass. Note: You cannot separate the bulb from the bulb holder. LED Lamps LED lamps are not serviceable. Have your vehicle checked as soon as possible. A

271

Fusion(CC7)Canada/UnitedStatesofAmerica,enUSA,FirstPrinting