2018 Fusion Owner's Manual

Doors and Locks

• You switch the ignition on. • You unlock the vehicle using intelligent access. Locking and Unlocking the Doors Locking All Doors Press and hold 7·8 and 9·0 on the keypad simultaneouslywith the driver door closed. You do not need to enter a code first. Unlocking Only the Driver Door Enter the factory-set or your personal five-digit code. You must press each number within five seconds of each other. The interior lamps illuminate. Note: All doors unlock if you switch on the all door unlocking mode. See Locking and Enter the factory-set code or your personal code, then press 3·4 on the keypad within five seconds. Opening the Luggage Compartment Enter the factory-set code or your personal code, then press 3·4 on the keypad within five seconds. Displaying the Factory-Set Code Note: You need to have two programmed keys for this procedure. 1. Remove the key blade from the transmitter. Unlocking (page 61). Unlocking All Doors

E155835 2. Remove the rubber covering (A) from the cup holder.With the buttons facing upward and the unlock button facing the front of your vehicle, place the first intelligent access key into the backup slot (B). 3. Press the push button ignition switch once and wait a few seconds. 4. Press the push button ignition switch again and remove the key. 5. Insert the secondprogrammed key into the backup slot, and then press the push button ignition switch. The factory-set code appears in the information display for a few seconds. Note: The code may not display until after any other warning messages first display. INTERIOR LUGGAGE COMPARTMENT RELEASE WARNINGS Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and risk injury. Children should be taught not to play in vehicles.

66

Fusion(CC7)Canada/UnitedStatesofAmerica,enUSA,FirstPrinting