2018 Fusion Owner's Manual

SteeringWheel

End of Travel Position The steering column sets a stopping position just short of the end of the column position to prevent damage to the steering column. A new stopping position sets if the steering column encounters an object when tilting or telescoping. To reset the steering column to its normal stopping position: 1. Confirm there is nothing obstructing the motion of the steering column. 2. Press and hold the steering column control until the steering column stops moving. 3. Press the steering column control again. Note: The steering column may begin to move again. 4. When the steering column stops, continue holding the control for a few seconds. 5. Repeat for eachdirection as necessary. A new stopping position sets. The next time you tilt or telescope the steering column, it stops just short of the end of the You can save and recall the steering column position with the memory function. See Memory Function (page 134). Pressing the adjustment control during memory recall cancels the operation. Easy Entry and Exit Feature The column moves to the full up and in position when you switch the ignition off. Switch the ignition on to return the system to its previous settings. You can switch this feature on or off in the information display. See InformationDisplays (page 96). column position. Memory Feature

ADJUSTING THE STEERING WHEEL - VEHICLESWITH: POWER ADJUSTABLE STEERING COLUMN WARNING Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in theCorrect Position (page 130).

E251370 Use the control on the side of the steering column to adjust the position. To adjust: • Tilt: Press the top or bottom of the control. • Telescope: Press the front or rear of the control.

70

Fusion(CC7)Canada/UnitedStatesofAmerica,enUSA,FirstPrinting