2018 Fusion Owner's Manual

Lighting

Headlamp Flasher

The headlamps remain on for a period of time after you switch the ignition off. Use the information display controls to adjust the period of time that the headlamps remain on. Note: If you switch the autolamps on, you cannot switch the high beams on until the system turns the low beams on. WindshieldWiper Activated Headlamps When you switch the autolamps on, the headlamps turn on within 10 seconds of switching the wipers on. They turn off approximately60seconds after you switch the windshield wipers off. The headlamps do not turn on with the wipers: • During a single wipe. • When using the windshield washers. • If the wipers are in intermittent mode. Note: If you switch the autolamps and the autowipers on, the headlamps turn onwhen thewindshieldwipers continuously operate. INSTRUMENT LIGHTING DIMMER Note: When disconnecting the battery or when it runs out of charge, the illuminated components turn to the maximum setting.

E162680 Slightly pull the lever toward you and release it to flash the headlamps. AUTOLAMPS WARNING The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the headlamps on in low visibility conditions, for example daytime fog.

E142451 When the lighting control is in the autolamps position, the headlamps turn on in low light situations, or when the wipers turn on.

77

Fusion(CC7)Canada/UnitedStatesofAmerica,enUSA,FirstPrinting