2018-MKX-Owner's Manual

Cruise Control

Canceling the Set Speed Press CNCL or tap the brake pedal. The set speed does not erase. Resuming the Set Speed Note: Only use resume if you are aware of the set speed and intend to return to it. Press RES . Your vehicle speed returns to the previously set speed and gap setting. The set speed displays continuously in the information display when the system is active. Automatic Cancellation Note: If the engine speed drops too low, an audible warning sounds and a message appears in the information display. Automatic braking releases. The system does not operate below 12 mph (20 km/h). Automatic cancellation can also occur if: • The tires lose traction.

Hilly Condition Usage Note: An audible alarm sounds and the system shuts down if it applies brakes for an extended period of time. This allows the brakes to cool. The system functions normally again after the brakes cool. Select a lower gear when the system is active in situations such as prolonged downhill driving on steep grades, for example in mountainous areas. The system needs additional engine braking in these situations to reduce the load on the vehicle’s regular brake system to prevent it from overheating. Switching Adaptive Cruise Control Off Note: You erase the set speed and gap setting when you switch the system off. Press OFF when the system is in standby mode, or switch the ignition off.

When you override the system, the green indicator light illuminates and the vehicle graphic does not

E144529

appear in the information display. The system resumes operation when you release the accelerator pedal. The vehicle speed decreases to the set speed, or a lower speed if following a slower vehicle. Changing the Set Speed • Press SET+ or SET- to change the set speed in small increments. • Press the accelerator or brake pedal until you reach the desired speed. Press SET+ or SET- . • Press and hold SET+ or SET- to change the set speed in large increments. Release the control when you reach the desired speed. The system may apply the brakes to slow the vehicle to the new set speed. The set speed displays continuously in the information display when the system is active.

• The engine speed is too low. • You apply the parking brake.

233

MKX (CD9) Canada/United States of America, enUSA, Edition date: 201707, First Printing