2018-MKX-Owner's Manual

Maintenance

ADJUSTING THE HEADLAMPS Vertical Aim Adjustment The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been involved in a crash, have the aim of the headlamp beam checked by an authorized dealer. Headlamp Aiming Target

C D

25 feet (7.6 meters).

Horizontal reference line.

Vertical Aim Adjustment Procedure 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away. 2. Measure the height of the headlamp bulb center from the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height. Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other. 3. Turn on the low beam headlamps to illuminate the wall or screen and open the hood.

E183236

2. Remove the wiper blade. 3. Install in the reverse order. Note: Make sure that the wiper blade locks into place. Note: Make sure the rear window is clean before using a new wiper blade. See Vehicle Care (page 333).

E142592

A B

8 feet (2.4 meters).

Center height of lamp to ground.

327

MKX (CD9) Canada/United States of America, enUSA, Edition date: 201707, First Printing