2018-MKX-Owner's Manual

Wheels and Tires

Second Stage: Checking Tire Pressure Note: If you are proceeding from the First Stage: Re-inflating the Tire with Sealing Compound and Air section and have injected sealant in the tire and the pressure is below 20 psi (1.4 bar), continue to the next step. WARNING The power plug may get hot after use and should be handled carefully when

What to Do After the Tire has Been Sealed After using the kit to seal your tire, you will need to replace the sealant canister. You can obtain sealant canisters and spare parts at an authorized Ford dealer. You can dispose of empty sealant canisters at home. However, you should dispose of canisters still containing liquid sealant through your local authorized Ford dealer or tire dealer, or in accordance with local waste disposal regulation. Note: After you use the sealing compound, the maximum vehicle speed is 50 mph (80 km/h) and the maximum driving distance is 120 mi (200 km). You should inspect the sealed tire immediately. You can check the tire pressure any time within the 120 mi (200 km) by performing the steps listed previously in the Second Stage: Checking Tire Pressure procedure.

1. Remove the valve cap from the tire valve. 2. Firmly screw the air compressor hose onto the valve stem by turning clockwise. 3. Push and turn the dial clockwise to the air position. 4. If required, switch on the compressor and adjust the tire to the recommended inflation pressure shown on the tire label located on the driver's door or door jamb area. You should check the tire pressure with the compressor turned OFF in order to get an accurate pressure reading. 5. Unplug the hoses, re-install the valve cap on the tire and return the kit to the stowage area.

unplugging.

Check the air pressure of your tires as follows:

E175983

350

MKX (CD9) Canada/United States of America, enUSA, Edition date: 201707, First Printing