2018-Navigator-Owners-Manual

Wheels and Tires

Park on a level surface, activate the hazard flashers and set the parking brake. Then, place the transmission in park (P) and turn the engine off. Removing the Jack and Tools Note: Pay close attention to the orientation of the jack and tool kit bag, because it will have to be reinstalled after changing the tire. 1. Open the liftgate, then locate the access panel on the floor behind the third row seat. Unlatch and remove the panel.

3. Remove the jack and tool kit bag from the bracket. 4. Loosen the straps and remove the tool kit bag from the jack. Removing the Spare Tire 1. Remove the swivel wrench from the tool kit bag. 2. Open the spare tire winch access plug at the bottom of the compartment for the jack and tools tray. 3. Insert the swivel wrench through the access hole in the floor and engage the winch.

WARNINGS Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications. If you are unsure if the jack capacity is adequate, contact the authorized dealer. Switch off the running boards before jacking or placing any object under your vehicle. Never place your hand between the extended running board and your vehicle. A moving running board may cause injury. Only use the spare wheel carrier to stow the wheel provided with your vehicle. Other wheel sizes could cause the spare wheel carrier to fail if it does not fit securely or is too heavy.

Note: Passengers should not remain in the vehicle when the vehicle is being jacked.

E252435

2. Remove the wing nut by turning it counterclockwise.

E252487

417

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201708, First Printing