2018_Taurus_Owners-Manual

Maintenance

Front Fog Lamp (If Equipped)

5. Locate the vertical adjuster on each headlamp. Use a Phillips #2 screwdriver to turn the adjuster either clockwise or counterclockwise to adjust the vertical aim of the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line. 6. Repeat Steps 3 through 7 to adjust the other headlamp. 7. Close the hood and turn off the lamps. Horizontal AimAdjustment Horizontal aim is not required for this Bulbs can become hot. Let the bulb cool down before removing it. Failure to do so could result in personal Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury. Use the correct specification bulb. See Bulb Specification Chart (page 258). Install in the reverse order unless otherwise stated. High-Intensity Discharge Headlamps These lamps operate at a high voltage. See an authorized dealer if they fail. injury. vehicle and is not adjustable. CHANGING A BULB WARNINGS

E163826 1. Switch all of the lamps and the ignition off. 2. Disconnect the electrical connector. 3. Turn the bulb holder counterclockwise and remove it. Note: Do not touch the bulb glass. Note: You cannot separate the bulb from the bulb holder. LED Lamps LED lamps are not serviceable items. See • Front side marker lamps. • Front direction indicators. • Side direction indicators. • Brake and rear lamps. • Central high mounted brake lamp. • Rear direction indicators. • Reversing lamps. License Plate Lamp 1. Switch all of the lamps and the ignition off. an authorized dealer if they fail. The following lamps are LED: • Front parking lamps.

257

Taurus(CPH)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201708,FirstPrinting