C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

Display interface

1. ACC cruise status indicator 

Light gray (daytime mode)/white (nighttime mode): System standby  Green: System active  Orange: System fault  Dark gray: Temporary user control 2. Set cruise speed 3. Set car-following headway 4. Leading vehicle 5. Distance to leading vehicle 6. Current vehicle

Warning! The distance indicated on the instrument panel from the vehicle ahead and the status of vehicles in adjacent lanes might differ from the actual conditions. You must maintain real-time observation of the vehicle and the road, adjust cruising speed and car-following headway appropriately, and if necessary, take over control to ensure that the vehicle can stop safely at any time. You are fully responsible for maintaining safe driving at all times. Due to interference from light sources (such as instrument reflections or wearing sunglasses) and environmental sounds (such as high volumes from in-car entertainment systems), warning information from the instrument panel may be difficult to detect. Drivers must constantly monitor the vehicle's status and road conditions, take control promptly, and not wait for warning signals before responding. Instructions for use EnableACC When the vehicle is powered on or started, navigate to "Vehicle center" - "Intelligent driving" - "Driving assistance" on the central control screen to set intelligent driving preferences to adaptive cruise control.

131