C318-G User manual – MEA (English UI) (update changes appli

Travel preparation

Replace the Battery

1. Lower casing 2. Circuit board 3. Trim ring 4. Rear cover 5. Upper casing 6. Battery As shown in the figure, the intelligent remote key consists of six components. Battery replacement steps: 1. As shown in the figure below, gently squeeze the back cover from both sides of the key with your fingers, slide it down, remove the back cover, and then detach the key trim trim.

2. As depicted in the left figure below, insert a hard, thin metal sheet (or rod) into the position indicated by the arrow in the left figure and pry open the upper and lower casings.

12