C318-G User manual – MEA (English UI) (update changes appli

Emergency rescue

High-voltage discharge method To urgently cut off the high-voltage system, first disconnect the high-voltage circuit connection, and then disconnect the negative terminal of the battery. The specific operation to disconnect the high-voltage circuit connection involves removing the fuse of the BMS controller located in the cabin fuse box. The procedure for cutting off the high-voltage system is as follows: 1. Open the hood; 2. Open the cabin fuse box (located above the driver's side wheel hub) and remove the fuse clip from the box;

3. Follow the instructions in the figure below to locate the BMS-15A fuse, and use the fuse clip to extract it;

238