C318-G User manual – MEA (English UI) (update changes appli

Travel preparation

Disengaging the alert state For vehicles with keyless systems, press the unlock button to open the doors, thereby releasing the body's alert state. When the vehicle is powered on, the engine anti-theft authentication completes successfully. After unlocking, if no door, back door, or start switch is opened within 30 seconds, the doors will automatically lock and re-enter the alert state. Alarm state During the alert state, if any of the following events occur, the system will switch to the alarm state: Opening any door without using the key button to unlock it;  The back door was illegally accessed Once in alarm state, the horn activates and the turn signals persistently flash. Caution Ensure activation of the anti-theft system when no passengers are present to avert triggering an alarm state as they depart. While in alarm state, the vehicle is impaired and should not be started. Disengage the alarm state Warning! Avoid modifying or mounting alternate anti-theft systems, as these actions may compromise the central control unit and interfere with other electronic devices. Losses resulting from unauthorized mounting or modifications to other electrical systems will be solely the user's responsibility and are not covered under the warranty. In the anti-theft alarm state, deactivate the activation by pressing the remote unlock button or the door handle button. Central locking system Exterior door lock control For vehicle unlocking/locking methods, please refer to the "Travel Preparation - Vehicle Key" section for comprehensive details. Warning! The mechanical key is designated for emergency unlocking of the driver's door. Post-unlocking, relock the driver's door with the mechanical key or open and close it once after full vehicle unlocking to prevent a horn alarm signaling an unclosed driver's door and a failure in locking.

18