F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Driving

Cruise Control System Principal of Operation

• Applying the brake • Activating the engine brake • Pressing the accelerator pedal shall deactivate cruise control system automatically.

3. Take your foot off the acceleration pedal. Note: The colour of the display changes. Changing the Set Speed • Press and release the SET+ or SET- button. • Press the accelerator or brake pedal until you reach the desired speed. Press and release the SET+ or SET- button. Note: If you accelerate by pressing the accelerator pedal, the set speed shall not change. When you release the accelerator pedal, your vehicle shall return to the speed that you have previously set. Cancelling the Set Speed Press and release the CAN button or press the brake pedal. The set speed shall not be deleted. Resuming the Set Speed Press and release the RES button. Turning the Cruise Control System off Press cruise control symbol and release it when the system is at the waiting position or after turning the ignition off. Note: Set speed is deleted when you turn the system off.

Cruise control system allows you to maintain the set speed without keeping your foot on the accelerator pedal. You may use cruise control system when your vehicle speed exceeds 30 km/h. Operation of Cruise Control System WARNING Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This may cause the loss of the control of the vehicle and accidents that may cause serious injuries or death. WARNING When you are going downhill, your speed may exceed the set speed, the system shall reactivate once the vehicle speed drops below the set speed. Change down a gear and press the SET- switch to assist the system in maintaining the set speed. When the cruise control is activated, it is automatically deactivated in the following conditions:

4

Speed controls are located on the steering wheel. Turning the Cruise Control System on Press cruise control symbol and release it. The symbol shall be displayed on the indicator. Adjustment of Drive Speed 1. Accelerate to the desired speed. 2. Press SET+ or SET - and release.

- 104 -