F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Driving

Speed Limiter Principal of Operation

speed limit set may be exceeded provisionally in cases such as overtaking. Using the Speed Limiter The buttons are located on the steering wheel. Switching the SystemOn and Off Press the LIM button to switch the system to stand-by mode. Press the LIM button again to turn the system off. Setting the Speed Limiter While the system is at stand by mode, press the speed up or down button to set the speed limiter to the current vehicle speed. The speed limit is recorded and displayed on the information display. Speed limit may be set with smaller or larger increments. Press the up or down button to change the set speed with smaller increments. Press and hold the up or down button to change the set speed with larger increments. To activate the speed limiter, activation

conditions of the PTO speed controller shall not be met (PTO activation conditions are for example, vehicle at standstill, park brake applied, shift at neutral, brake pedal not pressed, etc.) Otherwise, PTO speed controller shall be activated. Cancelling the Set Speed Press the cancel (CAN) button to cancel the set speed. System returns to Stand-by mode. Resuming the Set Speed Press the RES button to resume the set speed. Intentionally Exceeding the Set Speed Limit Press the accelerator pedal fully to provisionally exceed the set speed limit deliberately. System resumes the set speed when the current speed is lowered to a speed below the set speed or when you press the RES button.

CAUTION When you are going downhill, your speed may increase above the set speed. When you are going downhill, speed limiter brakes the vehicle automatically with auxiliary brake to resume the speed limit. symbol flashes on the screen if the set speed is exceeded. System is designed to support the driver. However, the system does not relieve you of the responsibility to be attentive and to decide correctly. The driver is always responsible for driving the vehicle with the required care and attention. Speed limiter resumes to be active until the ECU sleeps after the engine is turned off, then it is deactivated. The system allows you to set a speed value to limit your vehicle speed. The speed limit set shall be the active maximum speed of your vehicle. The

4

- 112 -