F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Power take off

Power Take Off

Engine electronic control unit allows that the engine is operated at a constant speed when PTO is activated. Maximum speed and function start parameters on the control unit may be set by a Ford Trucks authorized dealer. The following preconditions shall be met for engine speed control: service. The vehicle shall be stationary, service. Transmission shall be shifted to N, service. The handbrake must be applied. To activate the function: service. Press the “RES” button on the steering wheel, engine speed shall switch to function start speed service. When you use tyhe “SET+” and “SET-” buttons, engine speed shall be increased and decreased with increments that may also be changed by the authorized service.

• PTO may only be activated when the vehicle is stationary and rotating knob is at position "N". • PTO is activated by pressing the PTO button on the console. • Shifting is not possible when PTO is activated and vehicle is moving. • PTO cannot be activated when the vehicle is moving. • symbol shall be illuminated on the functions section of instrument when PTO is active.

4

Illustration is for informational purposes only. There are no adaptors or pumps on the vehicle. PTO is the unit connected to the transmission to operate the equipment that will be operated by taking power from the transmission (such as pumps). It transmits the power it takes from the transmission to the pump. PTO installation is optional and can be performed on both manual and automated transmissions during production in the factory. Contact a Ford Trucks authorized dealership for the retrospective PTO installations.

- 132 -