F-MAX-USER MANUAL-FULL BOOK-ENGLISH

SAFETY Park Brake Control

2

WARNING Park brake is spring type. If there is not enough pressure in the air tanks, park brake will not be released from the control lever. There shall be enough air pressure on the tanks to release the brake. If it is not possible to provide the air required, you may discharge the brake by rotating the spring of the setting bolt on the park brake bellows. Before releasing the park brake spring, ensure the safety of your vehicle by chocking the wheels. Do not drive the vehicle if any park brake circuits are not working. Bellows may be frozen if the brakes cannot be released while the lever is released on winter. Spring is installed by rotating the bellows installation bolt in the tightening direction. To ensure that the emergency spring is fully installed, the setting bolt shall be tightened until it does not turn any more.

- 10 -