F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Emergency braking system

Note: If the front of your vehicle is struck by an object or if the front of your vehicle is damaged, the radar vision setting may be impaired. This may cause the system to give false warnings or no warning at all. In order to ensure that the radar is working properly and to check the coverage area, you may contact a Ford Authorized Service Station Note: If you see a warning about the "low front camera resolution" on the information display as follows, this means that the camera’s view is blocked. Blocking of the camera view may cause the Emergency Braking System to loose its functionality or the may cause the system to turn off completely.

Note: The camera sensor is located in the lower center area of the windshield. If you see the warning above, clean the outside of the windshield in front of the camera by activating the windshield washer. Note: Do not attach a sticker or a film on the part of the windshield in front of the camera to prevent the sunlight. Note: Repair windshield damage in the camera's field of view. What to doWhen a Trailer is Connected to the Vehicle CAUTION After you have connected a trailer to the vehicle and made sure that all the electrical connections between the trailer and the vehicle are made, if the ignition is still on, close and open the ignition completely. Otherwise, your vehicle's brake system and Emergency Braking Systemmay not work properly. Emergency braking system shall automatically shut down if there is a fault in the brake system of the trailer or if the trailer you have connected to the vehicle is not equipped with an ABS feature.

4

Radar sensor blockage warning

Radar and the flat surface in front of it Note: It is the driver's responsibility that the radar sensor and the flat surface in front of it are clear and clean. Make sure there are no mud, heavy snow or any foreign objects on the front surface of the radar sensor and on the flat surface in front of the radar. Note: Do not have any attachments installed to the front of the radar on your vehicle. The flat surface in front of the radar shall not be covered or painted. Any changes to the radar surface or the flat surface in front of it may cause the Emergency Braking System to malfunction or may reduce the functionality of the system.

Camera sensor blockage warning

- 147 -