F-MAX-USER MANUAL-FULL BOOK-ENGLISH

MAINTENANCE AND SERVICE

Tires andWheels

POMLEADWHEEL CARE For preparation; • Aluminum rim cleaning detergent, microfiber cleaning cloth, dish sponge, waterproof gloves, mask, protective glasses and some water should be available. • For safety, protective equipment such as waterproof gloves, goggles and masks should be used. • The vehicle should be brought to the place where the rim cleaning will be done. For better cleaning, the wheels can be removed from the vehicle and the process can be continued. • Pomlead brand aluminum wheel cleaning detergent or other weak acid content aluminum wheel cleaning and polishing detergents on the market can be used as detergent.

water.

The following steps should be followed for maintenance; 1. Remove oil, mud or other dirt from the wheel using water and a damp cloth. 2. Dry the wheel surface after oil, mud and other foreign matter has been removed. 3. Spray the detergent on the rusted or oxidised area and wait 1-3 minutes. Note: Bubbles may form when the detergent reacts with the stains on the surface. 4. After waiting, surfaces that have been sprayed with detergent should be cleaned by rubbing with a dry microfiber cloth. 5. If there is still a stain, rust or discoloration after cleaning, clean the rusty or stained spots by spraying detergent and rubbing with a dish sponge. If there is a serious discoloration, please repeat the fourth and fifth steps two or three times and the discoloration will be cleared. Note: Excessive scrubbing with a sponge may cause the surface to become dull. 6. After removing rust and color changes, clean the rim surface with plenty of

Note: Detergent residue should not be left on the rim surface. 7. Finally, dry the rim surface with a dry cloth.

5

- 174 -