F-MAX-USER MANUAL-FULL BOOK-ENGLISH

MAINTENANCE AND SERVICE

Driver Cab

Returning the cab to driving position:

1) Lift the latch on the cab tilt cylinder up.

c) If the warning light is illuminated when you get into your vehicle, then the cab is not correctly locked. Please check. CAUTION Fully open and close the latch on the cab tilt cylinder while you are tilting and bringing the cab back to driving position, respectively. Do not tilt the cab or bring it back to driving position while the latch is in half-open or half-closed position. Otherwise, you may cause faults in the cab tilt cylinder. On vehicles with power cab tilt cylinder (optional) Tilting the cab:

1) Lower the latch on the cab tilt cylinder down.

5

Control Operating Manual (While raising the cab): 1-Pull the control out of its housing. 2-Open the upper cover automatically by pressing the rocker button on the front face of the control. 3-Tilt the cab by pressing the upper button of the control. Caution: Stand away from the vehicle while lowering and raising the cab To operate the power cab lifting system, ignition switch shall be at position 1, park brake shall be applied and gear shall be shifted to neutral.

Control Operating Manual (While lowering): 1-Lower the cab by pressing the button 2-Upper cover closes automatically while placing the control to its housing. Caution: The control has a single placing position, if you cannot place it easily, then you are trying to place it in the wrong direction. warning is illuminated on the display when you get in the vehicle, this means that cab is not locked correctly. Please check. If the

Open the bonnet of your vehicle.

- 181 -