F-MAX-USER MANUAL-FULL BOOK-ENGLISH

MAINTENANCE AND SERVICE

Engine

Running-in

Daily Inspections • Check the coolant level. If the level is at minimum or less, add 50% distilled water and 50% antifreeze (WSS M97B44 D) mixture. • Check windshield washer liquid level, add clean water if the level is dropped. • Check for any oil or liquid leaks in general. • Check the operation of the service and park brakes. • Drain the water and oil collected in the air tanks completely by pulling the drain ring.

5

Engine management is provided by the state-of-the-art electronic control unit.

CAUTION Remove the plugs of electronic control unit before welding on the vehicle. Otherwise, there is a risk of permanent damage to the electronic control unit. Welding operations shall be performed while the main switch is off.

There is no need to perform a special application in the running-in period of the engine. Drive the vehicle with the proper gear so that tachometer remains in the green zone as always.

- 184 -

Made with FlippingBook - Online magazine maker