F-MAX-USER MANUAL-FULL BOOK-ENGLISH

CONTROLS AND INDICATORS

Trip Computer

Caution! The system cannot detect a direct change when the oil is filled or drained. For the oil level display to be accurate, the engine must be stationary for 10 minutes after the engine has been switched off and on a level surface. Then, with the ignition in position two, engine off, the oil level will be checkable in 1 minute on the center display. When the vehicle is in motion, the oil level menu will not appear on the center display.

Oil Level Check The oil level can be displayed with the engine off, ignition in position two, by selecting the oil level menu on the center display screen. The oil level information will be available within 1 minute after the center display screen is woken up. In order for the oil level information to be correct, after the engine is switched off, the ignition must be kept in the ignition 0 position for at least 2 minutes on a flat surface. Then, 1 minute after the vehicle is turned to ignition 2 position, oil level information will be displayed on the center display screen.

3

OK: Indicates that the oil level is appropriate and above 20%.

LOW: Indicates that the oil level is not appropriate and is below 20%.

When calculating the oil level information, the center display screen is as shown in the image.

- 39 -