F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Seats and Beds

Cushion forward/backward adjustment Pull the button in front of the seat upwards to adjust the cushion forward/ backward. Desired position may be achieved buy pushing the cushion forward or backward at the same time. Armrests Armrests can be raised when required. Armrest inclination adjustment The inclination of armrests on the fore-aft direction may be changed by rotating the wheel. Inclination of the armrest is increased upwards when the wheel is rotated outwards, and reduced downwards when the wheel is rotated inwards. CAUTION Do not use the armrests to climb up the upper bed.

Heater Electrical heaters on the backrest and seat cushion are operated in two steps by pressing the seat heater switch. WARNING It is recommended that persons who cannot feel increasing temperature shall not use the heater function as it shall cause various injuries and health issues. Backrest inclination adjustment Press and hold the button to perform backrest inclination adjustment. Backrest may be adjusted to the desired position by moving it forward or backward at the same time. Release the button again to lock it. Lumbar adjustment By moving the buttons up or down, you may adjust the upper and lower lumbar supports to the person.

Air chambers are filled when the mentioned buttons are moved up, and discharged when the buttons are moved down. If the back cushion does not continue to inflate when the buttons are moved up, this means that you have reached the maximum setting in lumbar support adjustment. Side support adjustment By moving the button up or down, you may adjust the curve setting of the side cushions to the person. Air chambers are filled when the mentioned button is moved up, and discharged when the button is moved down. If the side cushions do not continue to inflate when the button is moved up, this means that you have reached the maximum setting in side support adjustment.

4

- 74 -