F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Circuit Breakers

Using the external switch

Vehicles without ADR

Use the circuit breakers to disconnect the electrical current in your vehicle. Vehicles with ADR

4

To cut the circuit off Raise the safety cover and raise the switch. To re-activate the electricity supply of the vehicle: Put the switch down. Close the safety cover. CAUTION Using this switch frequently may damage electronic devices on the vehicle. When any one of the cab interior and exterior breaker switches is activated, some electrical loads are deactivated within 1 second. After 10 seconds, all electrical connection shall be disconnected. CAUTION Vehicles with ADR carrying fuel oil and dangerous goods shall always be degassed before entering the service.

Turn the switch counter-clockwise to cut the circuit off. Turn the switch clockwise to re-activate the electricity supply of the vehicle. CAUTION Use the circuit breaker at least 2 minutes after you have stopped your vehicle. Otherwise, engine electronic control unit (and Denox control unit, if available) may be damaged. CAUTION Disconnect the battery terminals in case of any welding operation on your vehicle.

An ADR switch shall be available on vehicles that transport flammable, explosive, combustible material. ADR switch cuts all electricity of the vehicle off. There are 2 ADR switches on your vehicle; one is inside the cab, and one is outside. Both switches have the same function. To cut the circuit off, it is adequate to turn off one. Using the internal switch To cut the circuit off; Raise the safety cover and raise the switch. To re-activate the electricity supply of the vehicle: Put the switch down. Close safety cover.

- 89 -