H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Shifting

R2 Reverse, high range R1 Reverse, low range

Clutch is overloaded. This is displayed when you attempt to take off the vehicle with a gear higher than required in manual mode. Select a lower gear and take off the vehicle in this condition.

4

Reverse Manoeuvring Mode. This

shall be used while coasting only.

Clutch lining wear Clutch lining wear has reached limit value. Please visit a Ford Trucks authorized dealership in the shortest possible time.

Air pressure low: If the air pressure in the transmission air line goes below 5.8 bar, AL warning shall be displayed. WARNING • Attempting to shift while the air pressure is low may cause shifting of the transmission to neutral. In this case, exhaust brake shall not be active. • When the air pressure drops, it is not possible to disengage the clutch.

Accelerator Pedal: Remove your foot from the accelerator when this warning is displayed. If the warning is not removed, there is a fault in the system. Please visit a Ford Trucks authorized dealership.

Transmission oil temperature has reached upper limit. Stop the vehicle. Please contact a Ford Trucks authorized dealership.

- 111 -