H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Tag Axles

To control these situations, system rejects the relevant requests and a warning message is displayed on the Information Menu.

4

WARNING Axle load limits are increased 30% up to a speed of 30 km/h to obtain a better traction during take-off. After a speed of 30 km/h, limits return to original values, so the systemmay activate and lower the axles! WARNING

WARNING Sensors are calibrated during production, do not tamper with sensor connections to ensure safe driving. Remember that brake system shall also be affected in this case. We recommend you to visually inspect the mechanical connections of the sensors in weekly intervals. WARNING Never raise the tag axle when the vehicle is loaded.

Sensor positions and maintenance System includes displacement sensors in order to send vehicle weight information to the Electronic Brake System (EBS). Positions of the sensors used for calculating the axle weights on the vehicle are shown in the figure. There are 4 sensors in total on the vehicle, these are 1 for each of right and left chassis arm on the tag axle, 1 for live axle crossmember connection and 1 for front axle right chassis arm.

As shown in the figure, the tag axle shall not raised when the self-steered axle is on the ground, or the self-steered axle shall not lowered when the tag axle is raised.

- 125 -